15x15 Inch Double-Tube Heating 5-in-1 Heat Press Machine with PTFE Coated Plate - DIY T-Shirt, Hat & Mug Transfer Press for Sublimation (US Plug) | Perfect for Home Business, Craft Projects & Custom Apparel Printing

How to Use: 1. Turn on the power switch 2. Hold the handle and push the heating plate up 3. Adjust the thermostat to the required temperature (usually 120℃‑200℃) 4. Adjust the timer to the required time 5. Place the clothes on the lower ironing plate, stack the heat transfer paper (please pay attention to the front and back of the heat transfer paper), drag the heating plate back to its original position, and press the handle down until the end point; when the hot stamping is indicated when the set time is up, the alarm prompts (buzzer sounds), move the handle up to its original position 6. In the power‑on state, press "+" and "。" at the same time to switch the unit between Celsius and Fahrenheit 7. Long press "+" and "‑" to quickly add or subtract numbers Specification: Motherboard Power: 1000W (US Plug) Frequency: 50-60HZ (US Plug) Temperature Range: 40-210℃ (104-410℉) Time Control: 1-999s Highest Resolution: 300 (dpi) Print Size: A4, A5, A6 (sublimation paper) Color Grade: 256 (level) Transfer Area: Approx. 38 x 38cm / 15 x 15in Power Cord Length: Approx. 1.5meter / 4.9ft PTFE Coated Press Plate Size: Approx. 38 x 38cm / 15 x 15in Ironing Pads Size: Approx. 8 x 14cm / 3.1 x 5.5in Mug Press Machine Size: Approx. 7.5 x 13cm / 3 x 5.1in Sponge Pad for Plate Size: Approx. 12.5 x 16cm / 4.9 x 6.3in Total Size(LxW): Approx. 39 x 39cm / 15.4 x 15.4in Package List: 1 x Heat Press Machine Host 1 x Baking Cup Machine 1 x Sponge Pad for Plate 1 Set of Ironing Pad(2 accessories in total) 1 x Power Adapter 1 x User Manual Note: Pull out the plug when moving the machine, place on a safe and stable platform, and operate under ventilated conditions. Wear space protection equipment when operating the machine, and do not touch the heater to avoid damage to the machine.

With Thermal Insulation Cotton: The rotating shaft is made of aluminum alloy and does not rust. Upper shell is made of plastic material, and the inside is equipped with thermal insulation cotton. The temperature is not hot, unlike other old iron sheets

Simple to Operate: The controller buttons are made of silica gel, which is convenient and simple. Long press "+" and "-" to quickly add or subtract numbers. Unlike the old face stickers without feeling when pressed, and prone to problems

Uniform Temperature: Adopt latest double-tube heating, the temperature is even, the difference between the center temperature and the side temperature is only 5℃, and the transfer effect is better. But the old heating tube temperature exceeds 10℃

Used for: Good‑quality hot press uses a 38 x 38cm heating plate and a non‑stick and stable PTFE coated plate. 5‑in‑1 heat press is suitable for hats, T‑shirts, mugs and plates, which is labor‑saving

Package List: The combined heat press is equipped with a PTFE coated press plate(38x38cm), a set of ironing pads(8x14cm, curved), and a mug press(diameter 7.5x13cm, 11oz), sponge pad for plate(12.5cm and 16cm)